SLR Sentry7 adjustable gasblock

I’ve been looking for a while for an adjustable AR15 gas block that has adjustment with “clicks” to measure the setting and also keep the adjustment without any thread-lock.

So far I have found two manufacturers with such products, SLR Rifleworks and Syrac Ordnance.

Now I finally got my hands on one, the SLR Sentry 7 Clamp On model.

picture taken with a potato

Continue reading SLR Sentry7 adjustable gasblock

Loimaa Shotgun 9

As you might have guessed from the previous post,  SS took part in IPSC Shotgun Finnish championships 2014.

We all shot in the pre-match after a hard night’s work. The weather was good and the shooting was bad but fortunately not as bad as the jokes. The pre-match seemed never ending and it took from morning to evening so towards the end and due to exhaustion, the interest in the competition was pretty close to zero .

F*ck the walk-through, let’s just shoot the damn stage so we can get out of here!

The lack of interest resulted in stupid shooting and moving plans for the CoF, shooting no-shoot and misses. As a cherry on the top, the last CoF for SS was shot with a shotgun that wasn’t even the shooters own..   a defense, the shotgun intended to use and the shotgun actually used were both Benelli Vincis, only difference being the color of the fiber optic and the choke (finnish: SUUHINEN ) used.

Continue reading Loimaa Shotgun 9

Preparing for the pre-match @ Loimaa Shotgun 9 (Finnish Championship 2014)

Special Squad (SS) is once again operating as a work force in IPSC Shotgun Finnish Championships. This time the roster consists of a few RO:s plus few patch/plate-monkeys. SS arrived early to range to meet the MD for briefing about the necessary tasks before pre-match.

Most important task was to prepare the lines to hold the clay pigeons for stage1 (Shotgun FC2014 Stages).

Continue reading Preparing for the pre-match @ Loimaa Shotgun 9 (Finnish Championship 2014)

Nordic Rifle Match 2014

SS-RO on pre-match stage 19
SS-RO on pre-match stage 19

Special squad (SS) participated in Nordic Rife Match 2014  as Range Officers and shot the match in pre-match. For us the event was 4½ days from wednesday afternoon to sunday. SS was responsible to handle stages 15 and 16 on main match.

We had two new cameras to provide better coverage of the failures events of the match, totaling in possible 5 different angles.

such cameras
such cameras

Continue reading Nordic Rifle Match 2014

Freefloat for Norinco 56S

Why not? That’s the answer to your obvious question: Why?

Yes, it is an airsoft stock held in place by some aluminium bar and few screws. I borrowed the whole idea from a fellow hobbyist. Thank you!
Not 100% happy with the outcome but had to live with the tools I had in hand. All of this was made in balcony of urban apartment.
Not 100% happy with the outcome but had to cope with the tools I had in hand. All of this was made in balcony of urban apartment.
I also made thinner front sight from M4 bolt with electric drill and file. Old thick sight next to new as comparison.

SRA Legalizer for SLB holster

Since I got my SLB holster I knew that I would not need another holster with my CZ-75 SP-01 Shadow. Only problem with the holster is that it is not suitable for SRA. SRA rules state that the hoster must cover at least front sight, ejection port and trigger. At it’s vanilla state SLB holster covers only trigger, so something had to be done.

Like my SLB holster accessory for CZ-75 Airsoft gun my only “rules” for this next project was that it must not require any modifications to the holster and I must be able to attach and detach the addition easily without tools.

Without further talk, let me introduce the early prototype of SLB SRA Legalizer!

SLB & SRA

 

The SRA Legalizer is made from acrylic, polyethylene plastic, M3 screws, M4 threaded bar, plastic glue and ****load of curse words.

The outer side is held in place by M4 threaded bar. This is the first thing to insert when installing the accessory.
Inner side is held in place by pin made from piano wire.
Inner side is held in place by pin made from piano wire.
This is really an early prototype. As you can see from unfinished corners etc.
Advertisment ad adsense adlogger